swisswaffen.com

Swiss Schmidt-Rubin Straight-Pull Rifle Database

Introducing the ICM/CS (Christian Sailer) CZ Performance Trigger. Believe it our not this has been tested for over 2yrs now. It's been installed in his match CZ S2 pistols and if you know him, (if you don't look him up) he is hard on his equipment. We have tweaked it over the years to finally come to the final version and offer it on our site.



Flattest DA/SA Geometry available without causes fitting issues.

Added serrations on the face for go time! 2 National Championships behind the aim of CS!

Pre travel (top screw) M3.05X3MM and Over travel screw (in the face of the show) M3.05X4MM

Coated in DLC (Diamond Like Coating) which is dark grey or CRN (Chromium Nitride) which is silver.



This item can be used with (short reach/ short reset disconnectors). In the frames we have tested 85% of the time it is drop in with other companies internals. However due to the variations in trigger bars, frames and other items out of our control we suggest gunsmith installation.



YOU CAN ONLY USE THE PRE-TRAVEL (TOP SCRW) WITH THE CGW OR CZC CORRECT REDUCED TRAVEL DISCONNECTOR. WILL NOT BE INSTALLED IF YOU HAVE OEM DISCONNECTOR. WE LEAVE THE TOP SCREW OUT FOR THIS REASON. IT WILL BE INCLUDED IN THE PACKAGE WITH THE CORRECT 1.5MM WRENCH.



We suggest using Red 262 Loctite on the top (pre travel) screw if you have the proper disconnector

We suggest and use Blue 243 (not 242) on the screw in the face of the trigger (over travel)

Will fit CZ 75 models, Shadow 2, Shadow 2 Compact, Shadow 2 Carry.